PRODUCT

Ipamorelin (5 mg Vial)

No short description available.

Quickstart Highlights

Ipamorelin is a synthetic pentapeptide that acts as a selective growth hormone secretagogue by mimicking ghrelin at the GH secretagogue receptor[1][2]. Its key advantage is high specificity for GH release without triggering ACTH or cortisol elevation, making it one of the safer GH secretagogues with minimal off-target hormonal effects[1][3]. This educational protocol presents a once-daily subcutaneous approach using practical dilution for precise insulin-syringe measurements.

Reconstitute: Add 3.0 mL bacteriostatic water → ~1.67 mg/mL concentration.
Typical daily range: 100–250 mcg once daily (gradual titration recommended).
Easy measuring: At 1.67 mg/mL, 1 unit = 0.01 mL ≈ 16.7 mcg on a U-100 insulin syringe.
Storage: Lyophilized: 2–8 °C (35.6–46.4 °F) or freeze at −20 °C (−4 °F); after reconstitution, refrigerate at 2–8 °C (35.6–46.4 °F) and use within ~4 weeks.

Molecular Info

Chain Length:5 amino acids
Sequence Type:Growth hormone secretagogue
Molecular Weight:711.85 Da
Amino Acid Sequence:Aib-His-D-2-Nal-D-Phe-Lys-NH₂
Modification:Contains non-natural amino acids (Aib, D-2-Nal, D-Phe) and C-terminal amidation

Research Indications

Growthhormone

effective

Natural GH Stimulation
Stimulates pituitary gland to release growth hormone naturally with consistent elevation 30-60 minutes post-injection, maintaining healthy pulsatile patterns.
IGF-1 Enhancement
Increases insulin-like growth factor-1 production through natural GH pathways, mediating growth hormone's beneficial effects on muscle, bone, and tissue.
Anti-Aging Benefits
Supports cellular regeneration, collagen synthesis, and metabolic function through enhanced growth hormone pathways without disrupting natural hormone balance.

Body Composition

moderate

Lean Muscle Development
Promotes muscle protein synthesis and nitrogen retention when combined with resistance training, leading to increased lean mass over 12-16 weeks.
Fat Loss Support
Enhances lipolysis and metabolic rate through GH-mediated pathways, improving overall body composition and reducing visceral fat accumulation.
Body Recomposition
Improves overall body composition with simultaneous increase in lean mass and reduction in fat mass, particularly effective for aging populations.

Recovery

effective

Sleep Enhancement
Increases slow-wave sleep duration and quality when taken before bed, leading to more restorative sleep and improved morning energy levels.
Exercise Recovery
Accelerates recovery from exercise-induced muscle damage with reduced soreness, faster performance restoration, and enhanced training adaptations.
Tissue Repair
Supports tissue repair and cellular regeneration during sleep through enhanced growth hormone release and improved recovery processes.

Reconstitution

Draw 3.0 mL bacteriostatic water with a sterile syringe.
Inject slowly down the vial wall; avoid foaming.
Gently swirl/roll until dissolved (do not shake vigorously).
Label and refrigerate at 2–8 °C (35.6–46.4 °F) , protected from light.
Label and refrigerate at 2–8 °C (35.6–46.4 °F), protected from light.

Interactions

CJC-1295

Synergistic

Gold standard combination - CJC extends GH release while Ipamorelin provides the pulse for optimal growth hormone cycles

BPC-157

Synergistic

BPC-157 upregulates GH receptors, potentially enhancing Ipamorelin effectiveness for recovery and muscle growth

TB-500

Compatible

Complementary for muscle recovery, tissue repair, and overall regeneration

Sermorelin

Synergistic

Excellent combination - Sermorelin (GHRH) and Ipamorelin (GHRP) work through different receptor pathways, producing synergistic 3-5 fold increases in GH release

GHRP-2

Avoid Combination

Redundant GH stimulation pathways, may cause receptor desensitization

GHRP-6

Avoid Combination

Similar mechanism with higher hunger effects, stick to Ipamorelin for cleaner profile

Tesamorelin

Monitor Combination

Synergistic GH stimulation possible. Monitor IGF-1 levels closely and consider dose adjustments to prevent excessive growth hormone elevation.

Protocol Overview

Goal:Stimulate endogenous growth hormone release to support anabolic processes related to muscle growth, fat metabolism, and tissue repair[1][2].
Schedule:Daily subcutaneous injections for 8–12 weeks (extend to 16 weeks if desired), followed by a 2–4 week pause to resensitize receptors.
Dose Range:100–250 mcg daily with gradual titration; 200 mcg is a common middle-of-the-road dose.
Reconstitution:3.0 mL per 5 mg vial (~1.67 mg/mL) for accurate unit measurements.
Storage:Lyophilized refrigerated or frozen; reconstituted refrigerated; use within ~4 weeks.

Dosage Protocols

Start:100 mcg daily; increase by ~50 mcg every 1–2 weeks as tolerated.
Target:200–250 mcg daily by Weeks 5–12.
Frequency:Once per day (subcutaneous), ideally 30–60 minutes before bedtime.
Cycle Length:8–12 weeks; optional extension to 16 weeks, followed by 2–4 week off-cycle.
Timing:Evening bedtime dosing preferred; rotate injection sites.

Dosage Protocols

General Health u0026 Longevity:200mcg1x daily before bed
Body Composition:250-300mcg2x daily (morning, pre-workout)
Athletic Performance:200-250mcg2-3x daily (morning, pre/post workout)
Sleep u0026 Recovery:200mcg1x daily 30min before bed
Anti-Aging Protocol:200-250mcg1-2x daily (morning, bedtime)

Route:injectable

Storage Instructions

Lyophilized:Store at 2–8 °C (35.6–46.4 °F) for short-term or −20 °C (−4 °F) for long-term storage in dry, dark conditions[10][11].
Reconstituted:Refrigerate at 2–8 °C (35.6–46.4 °F); use within ~4 weeks with bacteriostatic water[12]. For longer storage, freeze aliquots at −20 °C (−4 °F) and avoid repeated freeze–thaw cycles[11].

Important Notes

Practical considerations for consistency and safety.

Use new sterile insulin syringes for each injection; dispose in a sharps container[8].
Rotate injection sites (abdomen, thighs, upper arms) to reduce local irritation[7][8].
Inject slowly; wait a few seconds before withdrawing the needle.
Document daily dose and site rotation to maintain consistency.
Ipamorelin has a short half-life (~1.5–2.5 hours)[4]; consistent daily timing maximizes effects.

Reconstitution

Clean work area and hands thoroughly with antibacterial soap
Gather all materials and let refrigerated peptide reach room temperature
Calculate required BAC water volume using the calculator below
Draw calculated BAC water amount into syringe
Inject BAC water slowly down the side of vial (never directly onto powder)
Gently swirl vial until completely dissolved (never shake vigorously)
Store reconstituted solution in refrigerator, use within 28 days

Route:injectable

How It Works

Ipamorelin binds to the growth hormone secretagogue receptor (GHSR-1a) and stimulates the pituitary gland to release endogenous growth hormone in a pulsatile manner[1][2]. Unlike earlier growth hormone releasing peptides, ipamorelin is highly selective and does not significantly stimulate ACTH, cortisol, or prolactin release at effective doses[1][3]. After subcutaneous injection, GH levels peak within approximately 40 minutes and return to baseline by 2–3 hours[4]. This short-acting pulsatile effect makes it suitable for once-daily administration to support physiological GH patterns. Animal studies have shown that even chronic daily exposure did not significantly desensitize GH release mechanisms[5], though cycling is recommended as a precautionary measure. Ipamorelin has also demonstrated pro-motility effects in the gastrointestinal tract via GHSR-1a receptors, with preclinical and clinical studies showing it can accelerate gastric emptying[6].

Lifestyle Factors

Pair with a balanced, protein-adequate diet to support muscle synthesis and recovery.
Combine resistance training and cardiovascular exercise to maximize anabolic and metabolic benefits.
Prioritize 7–9 hours of quality sleep nightly, as GH naturally peaks during deep sleep phases.
Manage stress levels, as chronic stress and elevated cortisol can blunt GH response.
Inject on an empty stomach (avoid food 2–3 hours before and 30–60 minutes after) to optimize GH release.

Injection Technique

Clean your hands and work on a clean surface.
Swab the vial’s rubber stopper and injection site with alcohol; allow to dry.
Draw the calculated dose into the insulin syringe, eliminating air bubbles.
Suitable SC injection areas include the abdomen (2 inches from navel), outer thighs, upper outer arms, or flank/hip area[7].
Pinch a fold of skin between thumb and forefinger; insert the needle at 45–90° into subcutaneous tissue[7][8].
Do not aspirate for subcutaneous injections; inject slowly and steadily[8].
After injection, release the pinched skin and withdraw the needle at the same angle.
Apply gentle pressure with a clean cotton or alcohol pad; do not rub vigorously.
Rotate sites systematically with each dose to prevent irritation or tissue damage[7][9].
Immediately dispose of the used syringe in a proper sharps container[8].

Benefits and Side Effects

Benefits

Supports increases in lean body mass and improvements in recovery through GH-mediated anabolic processes[1][2].
Enhances fat metabolism and supports favorable body composition changes over time[1].
High selectivity for GH release with minimal impact on other hormones (ACTH, cortisol, prolactin)[1][3].
May support improved gastric motility and digestive function[6].

Side Effects

Occasional mild injection-site reactions (redness, swelling) may occur; very rare reports of water retention or increased hunger.

Ipamorelin (5 mg Vial)

Resources

Categories

Company